TABLE 1-1 TECHNICAL SPECIFICATIONS, SLUDGE DEWATERING SCREW
| Type | Sludge Dewatering Screw |
| Model | SYDL201 |
| DS(dry sludge) Treatment Capacity | 13.5~22.5 kg/hr |
| Sludge Treatment Capacity | 0.45~6.8m3/hr (2,000~50,000 mg/l DS) |
| Insulation Class | IP55, F |
| Power Supply | 400V, 3phase, 50HZ |
| Moisture in Sludge after processing | 75~85% |
| PAM Consumption | 0.2~1% per DS |
| Water for Washing | 32 L/h |
| Water Feed Pressure | ≥0.2MPa |
| Screw Dimension | Ø200×1660 mm |
| Screw QTY | 1 |
| Motor,Screw | 0.37 kW |
| PAM Mixing Tank(L×W×H) | 380×380×700 mm |
| Capacity, Mixing Tank | 100 L |
| Motor,Mixing Tank | 0.18 kW |
| Functions, Control Panel | 1, Controlling Machine via Variable Frequency |
| 2, Controlling PAM Mixing | |
| 3, Automatic & Manual Operation | |
| Material | Stainless Steel SS304 |
| Packing | Wooden Case |
| Dry Weight | 420 KG |
| Dimension(L/W/H) | 2510/900/1300mm |
TABLE 1-2 TECHNICAL SPECIFICATIONS, AUTOMATIC CHEMICAL DOSING SYSTEM
| Type | Automatic Chemical Dosing System |
| Model | YTH500 |
| Total Power | 1.7 kW |
| Dry Chemical Dosing | 1~5 kgs/h |
| Capacity | 500 L/h, Ripening 60 min |
| Motor, Dry Feed Machine | 0.18 kW |
| Motor, Mixer | 0.75 kW, 2 units |
| Electrical Heating | 0.02 kW |
| Water Inlet Pipe Size | DN25 |
| Chemical Inlet Pipe Size | DN25 |
| Release Pipe Size | DN25 |
| Overflow Size | DN25 |
| Water Inflow | 0.3~1.5 m3/h |
| Water Inlet Pressure | 0.2~0.3 MPa |
| Material | Stainless Steel SS304 |
| Packing | Wooden Case |
| Dimension(L/W/H) | 1370/680/1500mm |